Skip to content

Water Quality Monitoring in Steam and Water Analysis System

The economics of power generation relies to a great extent on the efficiency of the fuel to heat conversion process and therefore the power generation industry is amongst the most advanced users of efficiency techniques based on online process analysis.

STEAM & WATER ANALYSIS SYSTEM is used in power plants and in those industrial processes where it is needed to CONTROL AND MONITOR WATER QUALITY. In power plants, it is needed to control the water/steam cycle characteristics in order to avoid damage to the components of the circuit as the steam turbine and the boilers.

Within the power station, the aim of water and steam control is to minimize contamination of the circuit, thereby reducing corrosion as well as cutting down the risk of the formation of harmful impurities.

Therefore it is very important to control the quality of water to prevent the deposits on turbine blades by Silica (SiO2), reduce corrosion by dissolved oxygen (DO), or prevent acid corrosion by Hydrazine (N2H4).

Measurement of water conductivity gives an excellent initial indication of falling water quality, analysis of Chlorine (Cl2), Ozone (O3), and Chloride (Cl) used for control of cooling water disinfecting, an indication of corrosion, and detection of cooling water leaks in the condense stage.

We built state-of-the-art SWAS systems for modern power plants, with reliable components and measuring instruments, ease of maintenance and low cost of ownership. Our solutions are based on modern sampling skid design, suitable for outdoor use in an industrial environment.

power-generation

The assembly of multiple instruments in a shelter creates several economic advantages:

  • Reliable / stable measurement
  • A good working environment for monitoring and maintenance
  • Lower maintenance costs
  • Longer lifespan of the equipment, etc.

SEEG Solution for available parameters for both process & laboratory solutions

Water Treatment  Steam Cycle Cooling Water
Chloride
Chlorine Chlorine Dioxide
Conductivity
Total Dissolved Solids (TDS) Dissolved Oxygen
Hardness/Alkalinity Hydrazine/Oxygen Scavenger
Oxidation-Reduction Potential
Ozone
pH
Silica
Sodium
Total Organic Carbon (TOC)
Turbidity
Suspended Solids(TSS) 
Ammonia
Chloride Conductivity
Total Dissolved Solids (TDS)
Copper
Dissolved Oxygen
Hydrazine/Oxygen Scavenger
Hydrogen
Iron
Oxidation-Reduction Potential
pH
Phosphate
Silica
Sodium
Total Organic Carbon (TOC) 
Chloride
Chlorine/Oxidants
Chlorine
Dioxide
Conductivity/Total
Dissolved Solids (TDS)
Copper
Hardness/Alkalinity
Microbiology
Molybdate
and Other Corrosion Inhibitors
Oxidation-Reduction Potential
Ozone
pH
Sodium
Total Organic Carbon (TOC)

Add Your Comments

Your email address will not be published. Required fields are marked *